Perfect Match Trio - 129 Hazelwood

Perfect Match Matching 3-in-1 Set

This Perfect Match Trio set comes with 3-in-1 Powder, Gel Polish and Lacquer. The gel polish is the bottle where you cannot see the color and it needs a UV light to cure properly. The 3-in-1 powder and lacquer does not require a UV light and can be air-dried. 

• Features over 100 different colors
• Polishes gives a high gloss shine that lasts for weeks
• Easy application, quick soak off
• Gel + Matching Lacquer Size: 0.5oz
• Dipping Powder Size: 1.5oz

How to Apply Gel Polish

1. Prep the nails- cut, file & buffer
2. Apply Gel Base Coat and cure for 30 seconds
3. Apply color of choice and cure for 60 seconds
4. Repeat step 3 for another coat.
5. Apply Gel Top Coat and cure for 60 seconds
6. Apply cuticle oil and massage around cuticle

Dip Application:

1. After preparing the nails, apply Perfect Match Prime Bond to all 10 nails and allow them to dry.
2. Working on one nail at a time, apply dipping base and immediately dip nail into Perfect Match 3in1 Color Powder of your choice. Dip at a 45-degree angle while gently rolling finger side to side for 5 seconds. Brush or tap off excess powder.
3. Repeat DIP Base and Color Powder application 2 times on each nail for additional coverage and to add strength.
4. Apply Dip Activator to all 10 nails and let dry.
5. File, shape, and buff nails. Use a nail brush to remove excess dust.
6. Apply DIP Activator to all 10 nails and let dry. Brush on a thin layer of DIP Top Coat, making certain to cover the entire nail. Be sure to cap the free-edge for a complete seal. Allow to air dry completely to a matte-like finish.
7. Apply a 2nd layer of DIP Top Coat to all 10 nails to maximize shine. Allow to air dry for approximately 2-3 minutes.
8. Finish with Cuticle Oil.

Acrylic Application:

1. Prep the nails - cut, file, buffer.
2. If you are seeking extra length - apply tips.
3. Dip the acrylic brush in your monomer and remove excess liquid from the brush. Make sure to get a good amount since you will be picking up a large bead.
4. Pick up a good amount of bead with your acrylic brush and wait for it to polymerize.
5. Place the bead a hairline away from the cuticles. Then, carefully brush the bead downwards to cover the nail.
6. Wait for the nail to dry. Then, file and shape the nail to your desire.
7. Apply Gel Top Coat and cure for 60 seconds.
8. Apply cuticle oil to rejuvenate the cuticles.

PLEASE NOTE: We strive to make our digital color swatches as accurate as possible to the actual product color but due to different monitor settings and electronic devices colors may differ slightly.